Gloss Black Vinyl Wrap
Pickup currently not available
Give your next wrapping project a sleek gloss black finish with VT Supplies Gloss Black Vinyl Wrap. This self-adhesive, calendared vinyl is suitable for vehicle body panels, roofs, bonnets, mirrors, interior trim and motorcycle panels with suitable smooth surfaces.
Product features
- Gloss black finish.
- Self-adhesive backing with air-release channels to help work out trapped air during fitting.
- Heat-assisted flexibility for shaping around suitable curves.
- Triple-layer construction: backing paper, adhesive vinyl and a clear protective surface film.
- Cut to your selected size and supplied as one continuous piece.
Samples and sheet packs
- 1 A5 sample sheet (148 × 210mm): £3.99.
- 1 A4 sheet (210 × 297mm each): £5.99.
- 5 A4 sheets (210 × 297mm each): £7.99.
- 10 A4 sheets (210 × 297mm each): £9.99.
Sample and sheet-pack prices include VAT and delivery.
Choose your roll size
Widths: 15cm, 30cm, 50cm, 75cm or 152cm. Lengths: 2 to 10 metres in whole-metre increments. Measure your project before ordering and allow extra material for trimming and curves.
Delivery services
- A5 samples and A4 sheet packs are sent by Royal Mail as letters or large letters, depending on the pack size.
- Rolls are sent with Evri, except full-width 152cm rolls, which are sent with Priority Express.
- Rolls trimmed to 147cm are sent with Parcelforce.
Delivery options for 152cm-wide rolls
Full-width 152cm rolls may incur an additional delivery surcharge depending on your delivery postcode. If a surcharge applies to your order, we will contact you directly before dispatch to confirm the amount, including fuel surcharge and VAT, and agree how you wish to proceed.
Alternatively, we can trim your 152cm-wide roll to 147cm wide at no extra charge. This option has delivery included with no delivery surcharge, including no regional surcharge. The ordered length stays the same. The 5cm-wide offcut will also be included in your order.
Fitting advice
Apply in a warm, clean environment to a smooth, dry surface free from dust, grease and wax. Check that paint is sound and fully cured. Test a small, inconspicuous area first.
Dry application is recommended for the air-release adhesive. Peel away the backing paper as you work and use a felt-edged squeegee to smooth the vinyl from the centre outwards. Use a heat gun carefully to help shape the film; avoid excessive heat or overstretching.
Important: Remove the clear protective film from the outer surface after installation to reveal the finished gloss appearance. This protective layer is separate from the backing paper.
Installation requirements
A heat gun is required for installation. An installation guide is provided with every order.